Specifications include, but are not limited to: TRACTOR, CRAWLER W/BLADE THAT TILTS AND ANGLES HYDRAULICALLY, 84 NET FLYWHEEL HP, NEW LATEST MODEL. * 1 EACH * 1 EA New latest model Crawler Tractor LGP with power angle, power tilt inside mounted blade; meeting the following specifications in accordance with manufacturer's standard published specifications. Engine: Diesel; 84 net flywheel horsepower; 24 or 12 volt (minimum) electric system; 40 amp alternator. Power: Main power cut off switch. Transmission Type: Hydrostatic drive. Operating Weight: At least 17,130 lbs. Steering: Disc, oil bath type, or hydraulically controlled with hand levers. Service Brakes: Shall be oil bath contracting band or hydraulically controlled. Parking brake to be provided. Undercarriage: Track gauge to be at least 6 5", sho e s to be at least 2 4" wide. Six ( 6) bottom rollers and one (1) top roller per side and life-time lubricated with front, rear and full track roller guards. Tractor shall have sealed and lubricated track chains and hydraulic track adjusters. Ground clearance 1 2" or more. Blade: Power Angle and Tilt, at least 1 1 2 " wide and at least 3 1" in height with a raise height of at least 27.9" and tilt 15" to either side with float position. Blade to angle at least 2 2 degrees to either side. Other Equipment: ROPS cab w/heater & defroster; air conditioners; LED work lights; back-up alarm; track guiding guards, full length; drawbar; engine side panels; front pull hook; radiator sand screen or severe service radiator; engine and transmission guard; armchair type suspension seat with seat belt; vandalism protection with locks; all service compartments must be lockable; instrument gauges to monitor all critical functions; cold weather starting aid. High intensity LED strobe light. Factory Warranty: 5 year/3,000 hours full machine warranty; warranty must accompany units when delivered. Unit should have manufacturer provided GPS telematics with service provided throughout warranty term. The telematics shall have the capability to monitor machine operation and performance of the unit. Manufacturer and dealer shall actively monitor the unit and notify appropriate ALDOT contact upon any error code notification with 24 hours.