Specifications include, but are not limited to: The Propper Ripstop Pants & Shirts as well as Armorskin Ripstop Pants & Shirts will be awarded to one bidder (lowest responsible bid) in order for the garments to have matching dye lots. Item 1: Rain Coat - (samples for Rain Coat MUST be supplied with your Bid Response) Material: (NO SUBSTITUTES ALLOWED) Style: 48125 100% Nylon Oxford reverses to HI-VIS 5.11 High Visibility Reversible Rain Coat, meets the requirements of ANSI/SEA 07-2010, Waterproof, adjustable, reversible. Pass-through pockets, Mic loops at the shoulders, integrated badge tab. Item 2: Sheriff Logo Safety Vest (w/Optional Body Worn) Blauer Oralite Style # 343R-S Zip-Front Safety vest; Color: Hi-Vis Yellow FABRIC: 3.7 oz. per square yard, 100% Spin-dye woven Polyester Color: fluorescent yellow TRIM: Binding: 100% polyester (self-fabric) (Color: fluorescent yellow) Hook and loop: woven nylon base. (Color: fluorescent yellow) Eyelets: aluminum, black enamel finish Ribbon: 100% nylon Taslan. (Color: black) Reflective trim: 1-1/4" Reflexite crosswalk trim 2-1/2" Reflexite crosswalk trim for front panels Zipper: 11-1/2" single pull, breakaway (non-locking) separating zipper. Size #5 coil. FRONT: Vest has a zipper front closure measuring 11-1/2” long. There shall be a pencil pocket made of shell fabric, measuring 2-1/8" by 5-1/4" and allow for two pens. The pocket should fit above the top horizontal Reflexite trim and above the inner vertical Reflexite trim on the wearer's left side. There shall be hook & loop closure at shoulder for breakaway option. BACK: One piece back with Reflexite trim detail with hook & loop closure at shoulder for breakaway option. SIDE ADJUSTMENTS: There shall be 2 side tabs on each side with hook and loop attachment for closure and adjustments. Side tabs shall measure 4-1/2” high by 9-1/2” long. The front shall have two rows of 1" loop attached above of the edge of the 2-1/2" horizontal Reflexite trim. The side tabs shall have 1" X 3" horizontal hook. An additional piece of 1" x 1" hook with loop shall be sewn on 1-1/2" away from the edge of the first stripe of hook. REFLECTIVE TRIM PATTERN: There shall be Reflexite reflective trim vertically down the front and back chest and across the back aligning with the side tabs. The side tabs will have Reflexite reflective trim to align with bottom stripes. There shall be one (1) stripe of 2” Reflexite reflective trim running horizontally across the front. There shall be four (4) stripes of 2-1/2” Reflexite reflective trim running vertically down the back aligning at the shoulder and ending at the top horizontal stripe. The Reflexite trim shall run in pairs with 2" spacing between them.