A. The preferred model is Garrett PD 6500i, Enhanced Pinpoint Walk-Through Metal Detector (Part No. 1168414), or approved equal. Full product information and complete product specifications must accompany bid. Failure to comply with this request may eliminate your bid from consideration. B. All walk-through metal detectors shall be gray. C. All walk-through metal detectors shall be standard 30-inch clearance. D. All walk-through metal detectors shall include weatherproofing. E. Eight (8) hours of support training, assembling, testing and calibrating must be included. F. Four (4) hours of initial onsite support for first-time setup, including an event visit, must be included. G. Must include one (1) per unit, Battery Modules, Part No. 2225410 H. Must include two (2) per unit, PD 6500i Walk-Through Caster Set, Part No. 1169101 (gray color). I. Must include one (1) per unit, Transportation Brace, Part No. 1169200. J. Must include one (1) per unit, 10 feet Jumper cord, Part No. 9431900. K. Detailed Specifications: a. A minimum of 20 application programs shall be included. b. Up to 200 distinct sensitivity levels. c. Independent zones. d. Overhead control units – all electronics – LCD, alarm light, LED bar graph, control touch pads – integrated to eliminate wire exposure. e. Tamper-proof settings – Three (3) access levels of security clearance. f. Self-diagnostic program – complete and automatic g. Zone sensitivity boost – adjustable in six (6) areas. h. Warranty – twenty-four (24) months, parts and labor. i. Passageway interior size: Width 30-inches, Height 80-inches, Depth 23- inches. j. Overall exterior size: Width 35-inches, Height 87-inches, Depth 23-inches. k. Temperatures – operating negative 4 degrees F to 149 degrees F; humidity to 95% non-condensing; store negative 40 degrees F to 158 degrees F. l. Power – fully automatic 100 to 240 VAC, 50 to 60 Hertz, 45 Watts, no rewiring, switching or adjustments needed. m. Regulatory information: Meets international airport standards such as TSA, ECAC, STAC, AENA, CJIAC and DFT. Meets electrical safety and compatibility requirements for CE, FCC, CSA, IEC, ICNIRP and IEEE. n. Weatherproofing – Meets IP 55, IEC 529 standard for moisture, foreign matter protection. o. Construction – attractive scratch and mar-resistant laminate. Detection heads and support: heavy duty aluminum p. Control Outputs – solid state switches (low voltage AC or DC) for operating external alarms and control devices. q. Alarm Indicators/Random Alarm Feature – 33 zones, volume-adjustable, audible tone, bright LED visual and remote alarms. Random alarm feature: adjustable from 0 to 50 percent. 2. The preferred model is Garrett Super Scanner V (Part No. 1165190) Handheld Detector, or approved equal. A. Ultimate sensitivity: exceeds NIJ 0602.02 standard. B. Large eight (8-inch) scan surface. C. Sharp audible alarm and bright red LED. D. Weatherproof rubber handle. E. Self-calibrating. Accessories listed separately on pricing sheet.
