Specifications: (1) Part #: ECSS0100G Description: Prover, 100 Gallon Series C Slicker Plate Prover Specifications: (a) Must be made of 304 Stainless Steel. (b) Must be calibrated to deliver 100 gallons with a NIST (National Institute Of Standards and Technology) traceable certificate. (c) Calibration must be performed by a certified NVLAP laboratory and traceable to National Institute Of Standards and Technology (NIST) before delivery. (d) Must have three (3) Adjustable Feet For Leveling. (e) Must have reinforcing bands to prevent distortion of prover when full with liquid. (f) Must have engraved data plate (Brass). (g) Must have machined perpendicular to axis so that excess liquid can be sheared off by sliding a plate across top of neck to achieve 100-gallon delivery. (h) Must come with glass circle slicker plate to shear off liquid. (i) Must be complete turnkey system built for specifications and tolerances outlined in the NIST ((National Institute Of Standards and Technology) handbook, 105-3, 105-4, and 105-8. (2) Description: Shipping & Handling Charges to ship Prover to the Alabama Department Of Agriculture, Weights and Measures Division, located at 1445 Federal Drive, Montgomery, AL 36107. Shipping and Handling Charge must include any additional fees such as tariffs and import fees (if applicable). Delivery must be within 16-18 weeks from receipt of purchase order. All correspondence must be made through the Vendor Portal.
