(1) 2' long steel pipe, o 6 " in diameter. • to include two (2) 7" collars to support an A-frame style hanger. • A-frame style hanger to include a 48" handle in between collars. • Both collars (including handle) to the ability to rotate 360 degrees, left or right. • A 7" sleeve needs to fit over the 6" pipe. • A-frame section to be welded to the 7" sleeve. o The sleeve will contain three (3) grease fittings spaced equally apart. • The handle will contain mounting locations for three (3) pulleys. • The handle will also include a 4"x 6" steel plate for securing a hand winch via bolts and nuts. • The A-frame arm should have a length of 74"and a support bar of 62". • An eyelet will be welded to the rear side of the hoist below the rotating sleeve for securing with a guy wire at installation. • vendor to supply two (2) 6' sections of steel pipe, with a 6" diameter to be used as vehicle barriers for the hoist. • All items will be painted primer black. • Price to include all labor, materials, supplies and equipment
