Specifications include, but are not limited to: Single Column Tabletop Testing Systems Requirements 1kN (225 lb.) Load Capacity Universal Test System Frames with 100N Load Cell Bodycoat base cover minimizing the effects of liquid spillage on the system base. Temperature-controlled bath Waterproof Pneumatic Grips with rubber-coated faces Footswitch Variable Angle Peel Fixture 3 Point Bend Fixture Standard Video Extensometer w/attachment allowing the Extensometer to be used with WaterBath Software w/ Side mount Touch Dashboard - NO additional PC required Onsite Installation services, and Training Services 1x Materials Testing System, Single column table top electromechanical testing system including: - Integrated digital closed-loop control and data acquisition electronics including crosshead extension and load measurement channels - Test control panel with two softkeys, with display, start, stop and return functions, programmable function keys, test status indicators, variable speed jog and specimen protection. - Testing speed range: 0.05 to 2500 mm/min (0.002 in/min to 100 in/min). - Crosshead return speed: 2500 mm/min (100 in/min) - Base adapters: Type O female fitting (6 mm diameter clevis pin) and Type D female fitting (0.5 in clevis pin). 1 English language option 1 Voltage option 240 V 1 BioCoat Liquid and dust resistant cover for Materials testing Systems ~ Load Cell ~ 1x Load Cell Capacity 100 N (10 kg, 22 lb.) - Type OOf Tension/Compression Type OO female fitting (2.5 mm diameter clevis pin) Includes adapter to Type O female fitting (6 mm diameter clevis pin). ~ Water Bath ~ 1x Water Bath Standard features include: - Bath designed for use with distilled water or saline solution for testing biomedical test specimens - Includes an upper and lower pull rod for mounting of grips or testing fixtures - Cable for 0-10V analog output to a 25 pin cable to connect to a Signal Conditioner Module - Pneumatically powered lifting mechanism smoothly raises and lowers the bath, preventing spillage - Allows accurate close loop control of bath temperature at 37 °C ±1 °C - Upper pull-rod designed to minimize buoyancy changes during low force testing - Pull rods have M6 female connections with two 3 mm pins for fixture/grip mounting and alignment. - Upper pull rod fitting: 2.5 mm clevis pin, male - Includes a 6 mm clevis pin, male to a 2.5 mm clevis, female coupling. - Lower pull rod: Connects to the base of the bath. Compatible with Advanced & Standard Video Extensometer 2 (AVE2 & SVE2) for axial strain measurements