Specifications include, but are not limited to: VRTEX® 360 Compact • GMAW, SMAW, GTAW (with and without filler metal), FCAW • TIG foot control • Base metals include: Mild Steel, Aluminum, Stainless Steel • Coupons: Groove 3/8 in. (9.5mm), Tee Joint, Lap Joint, Flat plate, Groove on 2 in. XXS Pipe (50mm), Groove on 6 in. Sch 40 Pipe (150mm), Pipe on Plate • Stick Electrode included: E6010, E6013, E7018 • MIG Wire included: .035” ER70S-6, .045” ER70S-6, .052” ER70S-6, ER4043, ER308L/LSI • Flux Core: E71T-1, E71T-8 • TIG Filler Metal ER70S-6, ER4043, ER308L • Welding positions: 2F, 3F, 4F, 1G, 2G, 2G (pipe), 3G, 4G, 5G (pipe), and 6G (pipe) • Welding techniques: push, drag, straight stringer, weave (straight, triangle, box) and whip • Transfer types: short arc, pulse, STT® and spray • Positions include vertical, horizontal, flat and overhead • Options for quench, trim, clean and cheater lenses • Replicates proper machine set-up using a welding procedure • Multi-pass welds available • Discontinuities shown in the weld and scoring • Additional features include: quench, trim, clean and cheater lenses. • Instant feedback on travel speed, work angle, travel angle, contact tip to work distance/arc length and aim • GTAW scoring additions: dip frequency, filler movement • Weave scoring additions: weave timing, weave spacing, and weave width • E6010 scoring additions: whip timing, dime spacing, and puddle time • Virtual bend test provides results instantly and reveals what causes a weld to pass or fail • Available in 15 different languages • Replay mode • Demo welds • Bypass/beginner mode • Embedded lessons on safety and measurement • Tolerance Levels - User Customization • 3 Learning Levels • Record, archive and verify student work • VRTEX WPS Manual, Imperial and Metric Printed Books • VRTEX Project Based Lessons, Instructor Guide, GMAW & SMAW Welding Training Curriculum on USB Drive
