Specifications include, but are not limited to: 1. ENGINE Engine shall meet Final Tier 4 emission standards. Engine displacement no less than 203 cu. in. Engine net power no less than 70 hp at 2500 rpm Cold Weather starting package with engine coolant heater and engine intake air heater, and/or glow plugs. Fuel tank shall be no less than 21 gallons 2. POWERTRAIN Two (2) speed transmission, shall be electronically modulated soft shift. Engine transmission coupler must be direct coupled. Maximum forward speed shall be at least 11 mph. Axles shall be induction hardened, one-piece forged shafts, with no-maintenance oil bath lubrication of inner and outer axle bearings. Park brake shall be spring applied and hydraulically released wet-disc assembly. ______________________ ______________________ ______________________ ______________________ 3. HYDRAULICS Standard hydraulic pump with minimum of 21 GPM Unit shall have front auxiliary connections. Machine shall have auxiliary hydraulics activated by a thumb switch located on joystick controls. Joystick control options shall provide a foot throttle for fuel efficiency and periodic power bursts. Pilot type controls with pattern selectable to “H” pattern type controls. Selectable on/off self-leveling loader operation. Manual attachment coupling system. 4. ELECTRICAL 12 Volt electrical system with minimum 70 AMP Alternator type charging system. Minimum of 750CCA heavy duty battery. Unit shall have a minimum of 2 front work lamps and 1 rear work lamp. Hazard warning lamps front and rear. Amber strobe light and Horn. 5. OPERATOR’S STATION Fully enclosed operator station with Heater/Defroster and Air Conditioning. Operator monitored machine conditions for hour meter, engine RPM, Battery voltage, engine Temp. and Hyd. Temp. Warning Lamps for Low Engine Oil Pressure, High Engine Temp., Charging System Failure, air filter restriction, and Hyd. Filter By-pass. Electronic push button auxiliary controls. Vinyl suspension seat. Rear view mirror. Slow moving vehicle sign.
