Specifications include, but are not limited to: Acceptable Models for the Small Hydraulic Tracked Excavator: Kobelco 85CS, Komatsu PC88MR-10, Case CX80C or equivalent. Unit shall have all standard equipment as shown in the manufacturer’s printed literature. Demo vehicle with all necessary attachments subject to testing prior to bid award. If demo unit is not available at time of award, then vendor is disqualified. 5 Basic Specifications: Operating weight with bucket shall be at least 18,700 lbs. equipped with a minimum 12’6” one-piece boom, minimum 6’2” stick, 32-36” bucket (0.45 cubic meter) construction bucket (see bucket section), rated capacity of lubricants, coolant, full fuel tank, operator, 450mm triple bar grouser steel track with bolted on rubber pads, counterweight as needed to accommodate attachments and standard equipment. 5a Ground pressure with rubber pad 450mm track not to exceed 5.4 psi, so closer to 6-6.5 psi w/ added weight of rubber pads