Specifications include, but are not limited to: 1. QUANTITY/TYPE: Two (2) current model and production year full time four (4) wheel drive, four (4) wheel steer, rubber tired utility vehicles. Bobcat 5600, or equal. 2. DIMENSIONS: The machine shall be the following dimensions: a. Overall length without attachments: One hundred forty-five (145”) inches. b. Overall height: Eighty-one (81”) inches. c. Overall width without attachments: Sixty and half (60 ½”) inches. d. Box height fully raised: Eighty-two (82”) inches. e. Boom reach: Forty-five (45”) inches. f. Maximum bucket hinge pin height: Eighty-three (83”) inches. g. Operating weight: Five thousand six hundred eighty (5,680) pounds. 3. ENGINE: The machine shall be powered by the diesel engine with the following specifications: a. One hundred forty-six (146”) cubic inches of displacement. b. Sixty-two (62) horsepower. c. One hundred sixty-six (166) ft-lbs of torque. d. Maximum speed two thousand six hundred (2,600) rpm. e. Glow plug assist starting. f. Ninety (90) amp alternator. g. Twelve (12) volt heavy duty battery. h. Twenty (20) gallon fuel tank. 4. HYDRAULIC SYSTEM: The hydraulic system shall have the following specifications: a. Belt driven gear pump. b. Three thousand (3,000) PSI operating pressure. c. Maximum hydraulic flow of twenty-seven (27) gallons per minute. d. Ten (10) micron hydraulic filter. e. Shall be compatible with all Bobcat attachments without modifications. 5. DRIVE SYSTEM: The drive system shall be hydrostatic with the following specifications: a. Full time 4-wheel drive. b. Limited slip differentials. c. High and low range forward/reverse. d. 4-wheel independent suspension. 6. STEERING: Four (4) wheel steering with a minimum turning diameter of seventeen (17) feet measured from the outside tires. Operator shall have the option of switching from All-Wheel Steer to Front-Wheel Steer by an electronic switch.