Specifications include, but are not limited to: Glass bead blast the existing boiled linseed oil sealant off of the copper dome to pristine copper. Glass bead blast the existing INCRALAC sealant off of the copper lantern to pristine copper. If necessary, after the copper dome and lantern has been glass bead blasted and are completely clean, all copper surfaces should be solvent wiped to ensure the copper is completely clean and dry. Xylene or denatured alcohol can be used. After the copper dome and lantern are thoroughly clean and dry, apply as soon as possible three (3) coats of Everbrite copper sealant (see attached Everbrite specification). An authorized Everbrite representative will provide contractor training as necessary.