Specifications include, but are not limited to: Must provide all labor, materials, tools, equipment and permits as required to perform the inspection, maintenance, and if requested repairs. Must perform work promptly and in accordance with a timeline approved in writing by UWM. Must report to the work area and check in with UWM before initiating any service. Must during the performance and completion of the work, maintain a clean and safe work area, free of debris, and remove all unused materials and dispose of legally at no additional cost to UWM, unless UWM approves use of our dumpsters. Must protect the track surface from grease and debris. The room must be left in the same condition as upon arrival, free of debris, stains, chips, dents, etc.