Specifications include, but are not limited to: Contractor will recycle residential electronics aggregated and sorted by Dane County staff at Dane County Clean Sweep facility. Dane County staff will collect, sort, and package electronic equipment for shipment in accordance with the State of Wisconsin’s E-Cycle Wisconsin program. The contractor shall provide all packaging and shipping supplies needed as well as recycling and reporting services in compliance with the program. Electronics are collected from residents into a maximum of seven categories specified by the Contractor. The County will load a trailer used to store collected electronic equipment. Sorted electronics will be either palletized or placed in Gaylord boxes on top of pallets. Contractor will provide pallets, Gaylord boxes, and shrink wrap to the County. Dane County staff will place all equipment except for very large TVs in Gaylord boxes on pallets. Large TVs that do not fit in Gaylord boxes will be palletized. Dane County currently owns and will provide 2 trailers to be used. Proposers should also be able to provide a shipping trailer to be left on site and to provide transportation services if needed.The County will be responsible for loading the trailer using a County-owned forklift. Typically 24 to 26 pallet stacks (6 to 7 feet high) will fit in a trailer. It is anticipated that 40-48 pallets of double stacked Gaylord boxes and very large palletized TVs will fit in a trailer. When the trailer is full Dane County will notify Contractor of its intent to deliver a shipment. Contractor shall accommodate County’s request to receive shipment within 1 week of request being made.