Specifications include, but are not limited to: i) Milwaukee Transport Services, Inc. expects the following items to be covered by successful bidder under the inspection service: (1) Inspect all equipment, oil/lube reservoir levels and report any excessive leakage. (2) Visually inspect the sheaves, drums or pocket wheels, wheels and bearings for general condition and proper lubrication. Lubricate all lubrication points (sheaves bearings, fittings, etc.) as needed. (3) Inspect the wire rope/load chain for any signs of kinking, crushing, cutting, birdcaging, corrosion or any other unusual wear. Check the chain/rope for proper reeling, lubrication and end connections. (4) Visually inspect the loan block and hook for any excessive wear, such as bending, twisting, cracks, grooves or increased throat opening. (5) Visually inspect the external part of the hoists, trolley frames, catwalks and handrails for loose bolts, broken parts, misalignments, broken welds or any other unusual conditions. (6) Check entire unit for smoothness of operation and proper controller identifications. (7) Open control boxes and check all contactors, relays, timers, etc., for proper operation, lose or broken connections. (8) Inspect safety devices, i.e. limit switches, for proper operation. (9) Inspect external motor, couplings and wiring for wear and deterioration. Check motor stator and windings and operations of all motors in general. (10) Inspect general condition of the end stops, rail sweeps, drop lugs and shock absorbing bumpers. (11) Check loan brake for proper operation. (12) Inspect motor brakes for proper operation or possible need of adjustment