Specifications include, but are not limited to: 11.1.In cases of blanks or other printing requiring curved lines, or other “fancy” work, a reasonable price will be allowed for such extra work, based on the actual time required to perform such extra work.11.2.All work shall be done in a first-class manner, free from typographical errors. The type must be of modern styles. Good ink shall be used, and the press work shall be first class. 11.3.The contract for printing is based on the use of black ink unless otherwise specified, but when work is ordered to be performed in any ink costing substantially more than black ink, reasonable compensation will be made to the Printer.11.4.As to fractions, except as herein otherwise specifically provided:11.4.1.When the work ordered does not amount to 1,000 impressions of press work, the Printer may charge for a minimum of 1,000 impressions.11.4.2.In estimating press work in book or pamphlet printing where cuts are printed on paper of different quality from that used in the main part of the book or pamphlet, each page so printed shall count as a full form. 11.4.3.When folding and stitching with wire is required on a job and does not amount to 1,000 signatures, the Printer may charge for a minimum of 1,000 signatures.11.4.4.When folding and sewing with thread is required on a job and does not amount to 1,000 signatures, the Printer may charge for a minimum of 1,000 signatures.11.4.5.These are all of the fractions authorized to be charged for a whole unit. When the press work is more than 1,000 impressions, no fractional part thereafter shall be charged as a whole. 11.5.Whenever time is charged for making changes in forms, etc., the actual time only shall be charged, and the Printer must attach an affidavit to the invoice stating that the price is just and reasonable and meets the requirements of this subsection.