Specifications include, but are not limited to: Milling will be required prior to laydown of base course. The Vendor shall be responsible for hauling of profiled cuttings from the project site to the Vendor’s nearest production facility. The approximate area to be milled is approximately 455 square yards. Milling will be required prior to laydown of base course. The Vendor shall be responsible for hauling of profiled cuttings from the project site to the Vendor’s nearest production facility. The approximate area to be milled is approximately 455 square yards. The Vender will be responsible for hauling and disposing of existing pavement, tacking of existing surfaces and placing/compacting Asphalt Base course with a minimum 2.5 inches to the level of existing pavement.