Specifications include, but are not limited to: Prep floor and install new carpet. 1.1 Vendor must remove old floor covering, prepare floor for new installation by patching and leveling as needed, supply and install new carpet. Rooms will be cleared of furniture by the Agency. 4.1.1.1 Approximately 5000 square feet of carpet (must be field verified). Must be equal to these specifications: Carpet MOHAWK Group (or equal) Doctor II Archaeologist T47934 Size 2424P 4.1.1.2 Cove Base Johnsonite (or equal) CB804X120TOE Product Number 440021182 Color: Fawn 4.1.2 Contractor will use care not to waste product and be efficient in installation practices. All carpet will be approved by factory specifications for recommended installation pattern. 4.1.3 Flooring and cove base color will be chosen from manufacturer’s standard offerings. 4.1.4 Vendor must install carpet and cove base in compliance with manufacturer’s written installation recommendations. Carpet installation shall be ¼ turn pattern. Installation shall be in full compliance with all federal, state and local regulations and ordinances. Installation shall be completed in accordance with the CRI-104, “Standard for installation of Commercial Textile Floorcovering Materials”, https:/www.carpet-rug.org/Documents/Publications/CRI-104-2015.pdf for all aspects not covered in the manufacturer’s written installation recommendations. This includes 100% application of adhesive to surface area at the prescribed trowel notch requirements or 3/32” or per the manufacturer’s instructions.