Specifications include, but are not limited to: Trane Model# YCD060C4HH0BD, Serial# K13101B04D and serial# K08102453D Units are 5 ton Gas Packs RTUs Must be compatible with the existing TRANE TRACER system. Contractor shall furnish all materials, labor, and equipment necessary to complete all work as indicated by these specifications. The intent is that the completed work consists of new system components which meets or exceeds the listed specifications and subject to approval and acceptance by the owner’s engineering department. Contractor shall furnish any incidental work, materials, labor and equipment that are necessary to complete the work, even if such incidental work is not explicitly included in the contract documents. Work shall be conducted as a single project. The work schedule shall be reviewed and approved by the Agency Project Manager prior to commencement of the work. The Contractor shall coordinate the schedule around the Agency’s work requirements. 4.1.1 All equipment is subject to contractor field verification as to specifications required for replacement unit. Replacement shall be subject to equipment submittals approval prior to installation. 4.1.2 Work under this Contract may only be performed by a mechanic who has first provided documentation to the Agency of certifications and or licensure for the following: Electricians-WV Master Electricians License Plumbers-WV Master Plumbers License HVAC-EPA 608 Certification and Apprentice Certification or Completion of HVAC Vocational Program.