Specifications include, but are not limited to: • Drill shall be mounted on a turntable base with a 240 degree rotation and a 30¬ inch slide stroke at any point in the arc of rotation. • Drill shall possess a power plant and a mechanical drill assembly, which delivers 35,000 foot-pounds of torque to the Kelly bar, which rotates the Auger or Core Barrel. • Drill shall be equipped with a power plant and mechanical or hydraulic mechanism capable of exerting a down pressure or crowding force of at least 12,000 pounds. • Drill shall be equipped with power plant and mechanical mechanism to operate a service hoist for installing piles; the hoist system shall have a lifting capacity of 8,000 pounds and can install 40-foot piling. • Drill shall be equipped with two hydraulic outriggers and jacks in the front area and two hydraulic outriggers and jacks in the rear of the drill carrier for fast and efficient leveling purposes. The outriggers are not required on track mounted drills. • Vendor shall furnish, when requested, Augers, Core Barrels, Rock Cutting Teeth, Muck Bucket and Casing, which are in good condition. Rock Cutting Teeth shall be of the type and quality comparable to the “Kennametal” brand. Vendor shall furnish all water needed for drilling purposes.