Specifications include, but are not limited to: NOPTIC NV3 Mobile Thermal Imaging Camera with Vehicle Spotlight Mount FLIR or Equal. NOPTIC’s one spotlight mount provides quick pan and tilt capabilities for a successful surveillance. The ability to pan and tilt with camera, with the spotlight off, allows for the timely and tactical use of the spotlight NV3 NOPTIC The quick Pan and Tilt technology without the spotlight actually on is specification to be equal to. 3.1.1.1 Thermal Imaging Camera Must be able to quickly pan and tilt with spotlight off. 3.1.1.2 Spotlight system must include a thermal imaging camera mounted on spotlight head assembly. 3.1.1.3 Spotlight system must include a minimum 9 ft cable for routing under dash. 3.1.1.4 Spotlight system must include a signal conversion box with RCA video output. 3.1.1.5 Spotlight system/Camera should have an IR Sensor Type of Passive IR uncooled microbolometer. 3.1.1.6 Spotlight system/Camera should have an IR Sensitivity Range of a minimum of 8 and maximum of 14 micrometers. 3.1.1.7 Spotlight System/Camera should have a Sensor array size of a minimum of 320X 240 pixels 3.1.1.8 Power consumption for the Spotlight System shall be 2 watts and Voltage supply shall be 9-16 Volts 3.1.1.9 Camera Size shall be a minimum of 2.3” X 2.2” X 2.9”. 3.1.1.10 Operating Temperatures shall be for -40 degrees F to 175 degrees F 3.1.1.11 Spotlight System/Camera shall have a Built in Lens Heater. Heater shall activate automatically at temperatures below 40 Degrees F. 3.1.1.12 Camera must be able to be viewed onboard computer screen, video screen or additional LCD monitor/video camera NTSC compatible