Specifications include, but are not limited to: PUMP CERTIFICATION AND TESTING The test site shall be adjacent to a supply of clear water at least 4 feet (1.2 m) deep, with the water level not more than 10 feet (3 m) below the center of the pump intake, and close enough to allow the suction strainer to be submerged at least 2 feet (0.6 m) below the surface of the water when connected to the pump by 20 feet (6 m) of suction hose. Pumping Engine Overload Test. Pressure Control System Test. Priming System Tests. Vacuum Test. LOW-VOLTAGE ELECTRICAL SYSTEM PERFORMANCE TESTING MAXIMUM OVERALL HEIGHT REQUIREMENT The apparatus specified shall be constructed as detailed and shall NOT exceed a maximum overall height of 118 inches. MAXIMUM OVERALL WIDTH OF ONE HUNDRED INCHES (100) The apparatus specified shall be constructed as detailed and shall NOT exceed a Maximum Overall Width of One Hundred (100") inches. This dimension shall include the primary construction of the apparatus body and chassis cab. Any peripheral items shall not be incorporated into this measurement. The items included, but not limited to, are: Rub Rails, Fenderettes, Mirrors, Lights, Handrails, Front Bumpers, Cab Steps, Overlays, Etc. MAXIMUM WHEEL BASE REQUIREMENT The apparatus specified shall be constructed with a maximum wheel base of 190”, purchaser desires shortest possible wheelbase and overall design in order to maximize turning radius. MODEL YEAR The chassis shall have a vehicle identification number that reflects a 2020 model year. COUNTRY OF SERVICE The chassis shall be put in service in the country of United States of America (USA). The chassis will meet applicable U.S.A. federal motor vehicle safety standards per CFR Title 49 Chapter V Part 571 as clarified in the incomplete vehicle book per CFR Title 49 Chapter V Part 568 Section 4 which accompanies each chassis. CAB AND CHASSIS LABELING LANGUAGE The cab and chassis shall include the applicable caution, warning, and safety notice labels with text to be written in English.