Specifications include, but are not limited to: Electrically Heated Autoclave, Approximate minimum 24” nominal outside diameter x 23-1/2” inside diameter 48” length. Power Requirements: 480 VAC 3 phase 30-35 amps Air Pressure supply: Filtered Shop Air Horizontally Saddle Mounted as outlined below: Size: 23-1/2” inside diameter x 48” straight shell length, rear shell-to-head weld seem to front door flange face. Configuration: Horizontally installed with one end having an ASME flanged and dished head welded to shell, the other end with a hinged dished head closure assembly. Shell supported on two (2) saddles with fork lift openings to give approx. 20” clearance from floor. Chamber to be heated electrically with internally installed tubular type heating elements for a minimum operating range of 120°F to 275°F. Electrically Heated Autoclave, 24” nominal outside diameter x 23-1/2” inside diameter 48” straight shell (head weld seam to door face) length, Horizontally Saddle Mounted as outlined below: Size: 23-1/2” inside diameter x 48” straight shell length, rear shell-to-head weld seem to front door flange face.