Specifications include, but are not limited to: B. FSX TRAPBLASTER™: Bi-directional cleaning for DPFs and DOCs (catalyst) Dual scanning air knives with a minimum of 120 CFM or 3400 liters per minute/ 100 PSI or 7 Bar dry air delivered to TrapBlaster addressing both ends of the DPF simultaneously Automatic cleaning mode with timer that activates signal light to alert operator the timer has expired and to observe if cleaning has completed On-the-fly electronically controlled manual override to allow custom cleaning on specific areas of the DPF if needed Hold the DPF vertically during cleaning to take advantage of gravity and dust collector air direction A window allowing the operator to see the ash exiting the DPF to confirm when the cleaning process is completed Diagnostic feature shall be built into the cleaning action allowing the detection of failed cells, cracks and defective filters An upper and lower window with internal lights allowing the operator to observe filter cleaning and potential bypass Complete set of adapter plates to accommodate DPF ranging from 6” to 16” diameter Adjustable to clean DPFs up to 36” long or as small as 6” in length The nozzle travel distance shall be 14" and can be used on either radius or diameter An adjustable nozzle system that allows cleaning under filter flanges and into recessed cavities Electronically controlled adjustment for DPF height Variable speed rotation of the DPF during the cleaning cycle