Specifications include, but are not limited to: Minimum 48 ft.L (Overall length with minimum 40 foot floor) x 8.5 ft.W x 8.5ft. interior height enclosed goose neck trailer with custom interior, for use by the Virginia State University College of Agriculture (VSU) for agricultural display and showcase training unit. minimum 48 ft.L (Overall length with minimum 40 foot floor) x 8.5 ft.W x 8.5 ft. interior height enclosed goose neck trailer with custom interior, for use by the Virginia State University College of Agriculture (VSU) for agricultural display and showcase training unit. Provide one enclosed goose neck trailer similar to basic Featherlite aluminum trailer, model number 4941-0040, ATC Quest model OSTAG8553+0-3T8.OK, or equivalent, at minimum 8.5’W x 48'L x 8.5' interior height. The trailer shall include all standard equipment, and shall be provided with the following features and specifications requirements: Basic trailer shall have no rear “beaver tail”, and no doors above fenders. (3) 8,000 pounds GAWR Dexter Torflex rubber suspension or equivalent torsion axles: • EZlube hubs, or equivalent • Electric brakes, all wheels • (6) 8-hole aluminum wheels, bright finish (6) Goodyear LT235/85R16 load range G radial tires or equivalent • (1) Goodyear LT235/85R16 load range G or equivalent radial spare tire, mounted on (1) 8-hole aluminum wheel, bright finish • Wheel boxes, if equipped, smooth aluminum • Aluminum fenderettes, shall cover all wheels Goose neck coupler, 2-5/16", 25,000# minimum capacity • The goose neck assembly shall be capable of full separation from the trailer and reattachment following showcase operation. • Goose neck coupler system shall have a 2-5/16” ball coupler and adjustable kingpins. • Provide and install stainless steel front shield panel for front face and front corners of goose neck area Goose neck truck plug,7 way: • Provide and install a wiring extension cable terminated with a 7-pin plug having standard wiring connections to mate with an SAE J560 socket. Goose neck required features: • Goose neck shall have a tapered aerodynamic nose. • The gooseneck ceiling area shall be lined with white aluminum, minimum .040” thickness. • Ceiling liner shall be fastened to trailer frame posts by means of screws. • Ceiling liner screws shall be spaced to securely fasten liner, and provide a smooth ceiling surface. • The gooseneck wall area shall be lined with white aluminum, minimum .040” thickness • Wall area liner shall be fastened to trailer frame posts on 12” centers, by means of screws. • Wall area liner screws shall be spaced to securely fasten liner, and provide a smooth wall surface. • Provide and install coping trim where top of the wall liner meets the ceiling liner.