Specifications include, but are not limited to: Pressure washing to remove mildew that would decrease the adhesion of coatings. Cleaning and filling of cracks smaller than ½ inch wide with acrylic crack filler. Cleaning and filling of cracks larger than ½ inch wide with court patch, a combination of sand, Portland cement and acrylic court patch binder. Leveling of depressions deeper than 1/8 inch with court patch. Application of acrylic resurface mixed with clean, 80-mesh silica sand. This step is required for any area that needs filling or smoothing prior to color applications. Application of two coats of collegiate/professional-grade acrylic color coating. Inbound and outbound colors will be selected by the School Board. Court surfaces must be cleaned before each coating application to remove dirt, leaves and debris. Layout and painting of lines by hand with a brush using textured white acrylic line paint.