Specifications include, but are not limited to: 10. Maximum Length – 31 ft. or 372” 11. Maximum Width – To include mirrors – 114” 12. Maximum Height – To include lights and deck gun – 9’5” or 113” a. Deck gun is specified below. 13. Wheelbase to be determined by the manufacturer but must the shortest possible and still meet the requirements of this specification. 14. Maximum inside turning radius must be lower than 18’. a. This is the radius of the current engine being replaced. 15. Gross vehicle weight will be determined by the manufacturer but must be sufficient to adequately carry all needed equipment and personnel. a. Front axle weight minimum – Manufacturer recommendation b. Rear axle weight minimum – Manufacturer recommendation Chassis and Vehicle Components 16. Four door cab and chassis designed exclusively for the fire service. a. The chassis will be designed and manufactured for heavy-duty service, with adequate strength, capacity for the intended load to be sustained, and the type of service required. 17. Front Axle a. Front axle will be reverse “I” beam type with shock absorbers. b. Weight capacity based on manufacturer recommendation c. Viewing windows will be provided on both sides for checking the oil level. 18. Front Suspension a. Front suspension will be of “leaf” design. b. All bushings will be maintenance free. 19. Rear Axle a. Sized per manufacturer recommendations. b. Minimum 27,000 pounds