Specifications include, but are not limited to: 1.SCPSwill require the servicesofanOfferor toperformthefollowingactivities,onanasneededbasis,at various sites and properties including, but not limitedto:a.Visual inspection of interior and exterior building components such as classrooms, offices, attics, roofs, crawl spaces, vapor barrier, windows, doors, HVAC, and plumbing systems to determine cause of moisture /water intrusionissues.b.Indoor air quality evaluation and testing, mold testing, bacteria testing, carbon dioxide testing, VOC testing, temperature and relative humidity testing, particulate and unknown substance testing, building science studies, andpersonnelaudits/interviewsasitrelatestoindoorenvironmentalquality concerns.c.Preparation of mold management plans, mold remediation and clean-up protocols, and indoor environmental improvementplans. 2.Offerorshall investigate and evaluate moisture and mold problems thatare comparable to the recommendations presented in thefollowing:a.USEPA’s guidance document (EPA 402-K-01-001) “MOLD REMEDIATION IN SCHOOLS AND COMMERCIAL BUILDINGS” Reprinted September2008b.ANSI / IICRC S500-2006 –Standard and Reference Guide forProfessional Water DamageRestorationc.ANSI / IICRC S520-2008 –Standard and Reference Guide for Professional MoldRemediationd.A Brief Guide to Mold in the Workplace.Occupational Safety and Health Administrations(OSHA)3.Offeror shall investigate and evaluate indoor environments, teaching laboratories,and mechanical spaces within occupied buildings comparable to the following recommended national standards:a.ANSI / ASHRAE Standard 62 –Ventilation for Acceptable Indoor AirQualityb.ANSI / ASHRAE Standard 55 –Thermal Environmental Conditions for Human Occupancyc.ANSI / AIHA Standard Z9.5 –Laboratory Ventilation