Specifications include, but are not limited to: The Contractor shall provide a glassware washer/dryer capable of cleaning a variety of labware from large (1000mL+) thru small (50mL) containers and utensils of various sizes, (as small as a lima bean), made of glass, plastic and stainless steel. The Contractor price shall include delivery, installation, leveling, making final utility connections, testing, end user training and spacers to fill the gaps around the washer/dryer and cabinet, to ensure a pleasing appearance. The Contractor shall provide a system capable of using existing supply of alkaline detergent with acid neutralizer. Under Counter Glassware Washer/Dryer Specifications 1. Compact footprint not to exceed: exterior dimensions: 35.0” high x 27” wide x 29” deep. 2. All electric operation (208V, 3Phase 30A) with power cord terminating in NEMA L1520P plug. 3. Interior: Chamber sump constructed of stainless steel for superior corrosion resistance. Chamber walls, ceiling and door are constructed of type 304 stainless steel. Chamber with rear wall docking connections for injector modules. 4. Exterior cabinet: Constructed of type 304 brushed stainless steel for corrosionresistance 5. Upper and lower spray arms with sensor for automatic spray arm monitoring of rotation and/or blockages of spray arms; the rotation speed of the spray arm is monitored during wash cycles. Blockages due to loading errors or build-up of foam create fault condition and alert user. 6. Filter: Filter system with large surface filter, coarse filter, glass breakage filter and micro-fine filter 7. Test port: Ability to monitor wash temperatures for process validation. 8. Waterproof System: Incoming hot, cold and DI water lines are double wall with electronically activated solenoids. In event of leak float switch is tripped which shuts off incoming water and activates drain pump. 9. Water softener: Built-in adjustable water hardness control, with automatic reactivation program.