Specifications include, but are not limited to: 1.Check fluid levels (oil & coolant) and top off as required; fuel to be provided by FW.2.Perform external visual inspection to evaluate general condition of generator andcomponents.3.Run engine to check for leaks and proper operation of instruments and record readings.4.Inspect air cleaner(s), piping and connections, and clean as required.5.Inspect turbo-rotating assembly (if applicable).6.Service batteries, add fluid (if required) and clean connections, and record battery cellspecific gravity.7.Inspect condition of hoses, tighten all clamps, and verify leak free condition by running atoperating temperature.8.Inspect radiator and radiator cap for damage and proper airflow; Record antifreezeprotection level and check inhibitor concentration.9.Inspect belt tension and adjust as required.10.Inspect generator for cleanliness and clean as required.