Specifications include, but are not limited to: 1.2.1All posts and rails shall be galvanized ASTM A120, Schedule 40 pipe or Allied SS-40.1.2.2Fabric:1.2.2.1Fabric shall be aluminized steel with an aluminum coating of 0.4 ounces per square footof actual wire surface. 1.2.2.2All 36”, 42”, 48”, 72” and 96” high fabric shall be one piece of 6-gauge or 9-guage wire woven in a 2”chain link diamond mesh pattern. Top and bottom selvage shall have a knuckled finish.1.2.2.3All 120”and 144”high fabric shall be one piece of 9-guageor 11-guagewire woven in a 1¾”or 2” chain link diamond mesh pattern. Top and bottom selvage shall have a knuckled finish.1.2.2.4Some projects will require a thermally fused vinyl coated fabric of 9-guage finish with a 10-guage steel core. 1.2.2.5Fabric shall be securely fastened to all terminal, corner and gate posts by ¼”x ¾”tension bars with 11-guage pressed steel bands spaced approximately fourteen (14) inchesapart.1.2.2.6Fabric shall be securely fastened to top rail with .062 x.375 self-locking line post fabric hand spaced fourteen (14) inches apart. 1.2.2.6.1APS may require the fabric be fastened by a locking aluminum clip as manufactured by the Page AluminizedCorporation or an approved equal. 1.2.3Line posts:1.2.3.1All intermediate line posts for 36”, 42”, 48” and 72” fabric shall be 1.9” Outside Diameter (O.D.).1.2.3.2All intermediate line posts for 96”, 120” and 144” fabric shall be 2.375” O.D.1.2.3.3All posts shall be evenly spaced in the line of fence no further apart thanten(10)feet.1.2.3.4All posts shall be equipped with tops designed to exclude moisture and to hold top rail.