Specifications include, but are not limited to: B. Four (4) part form covered by this specification shall be: 1. Paper: No. 4 bond. a. Part 1 – 15# b. Part 2 – 16# CB c. Part 3 – 15# CF** d. Part 4 – 20#* *Contractor may vary this weight to meet US Postal Service regulations for thickness. **Die cut smaller for easy extraction. 2. Size of Forms: 10” X 4-2/3”. Ply 3 shall be die cut smaller for easy extraction. 3. Ink: Black 4. Paper Color: White 5. Carbon: (a) Throwaway tissue sheet with black carbon spots between part 1 (original copy) and part 2 (front of mailer – envelope) for space for return address and mail address only. (b) All carbon used shall be formulated so that the image will not smudge on printers or when processed by the US Postal Service. THIS IS CRITICAL. 6. Construction: Continuous connected forms perforated between each form, fan-folded. Forms and perforations shall be strong enough to be processed through ADP printers, and perforations shall be of such design that each copy of the form can be separated from the other forms manually without tools and without tearing another copy of the form. Forms shall be assembled in such a manner that they will be in exact registration and will feed and process through the ADP printer without jamming, tearing, and wrinkling. 7. Packaging: 250 forms per corrugated cardboard container; end-labeled. Exact quantity. NO BREAKS. 8. Packing: Eight boxes of 250 forms in corrugated cardboard containers. Containers must be the proper size not requiring any filler material. Containers must be fully packed with forms. 9. Set Assembly: Parts 1 and 4 are blank; print front side only of part 2; print front side and backside of part 3 only;”.