Specifications include, but are not limited to: Steel wire Chain link fencing meeting ASTM A392 hot-dipped galvanized after weaving (GAW)with weight of not less than 2.0 oz/ft² Class 2; Wire: 9-gage steel . Chain link industrial/commercial fence fabric shall be made of steel wire helically wound and interwoven in such a manner as to provide a continuous mesh without knots or ties. Selvage of fabric: twisted top; knuckled bottom. Fence wire fabric rolls shall be manufactured in a continuous 50 foot length. Steel pipe shall be produced per ASTM F1043-18 standard specification for strength and protective coatings, Group IC round steel electric resistance welded pipe with a minimum yield strength of 50,000psi (344MPa) high strength steel pipe coating shall be either; (1) external coating Type B with internal coating per Type D; or (2) external coating per Type B; internal coating per Type B. All offered materials shall be certified to meet applicable Federal, State and Local Specifications, with “Made in the USA” stamped on each length of pipe. All fence fittings and accessories shall be pressed steel, malleable steel or cast iron manufactured in accordance with ASTM F626-14 (all fence fittings and accessories shall be furnished hot dip galvanized and in accordance with ASTM A-123, A-153, And F-626) imported or domestic fence fittings are acceptable.