Specifications include, but are not limited to: 1. Type B Patching: The Contractor shall be required to repair potholes in bridge decks. Bid pricing shall be per square yard and shall include all necessary material and labor, such as, but not limited to, saw cutting, removal and disposal, cleaning rebar, VDOT approved patching materials and any necessary form work. All patching shall be in accordance with Section 412.03(b)2 of the 2016 edition of the Virginia Road and Bridge Specifications and be ready for traffic as roadway restrictions dictate. All areas to be patched shall be approved by VDOT prior to beginning work. Additional or replacement reinforcing steel and galvanic anodes shall be paid separately. 2. Type C Patching: The Contractor shall be required to repair potholes in bridge decks. Bid pricing shall be per square yard and shall include all necessary material and labor, such as, but not limited to, saw cutting, removal and disposal, cleaning rebar, VDOT approved patching materials and any necessary form work. All patching shall be in accordance with Section 412.03(b)3 of the 2016 edition of the Virginia Road and Bridge Specifications and be ready for traffic as roadway restrictions dictate. All areas to be patched shall be approved by VDOT prior to beginning work. Additional or replacement reinforcing steel and galvanic anodes shall be paid separately. 3. Repair Expansion Joint Type A: The Contractor shall be required to repair, clean and reseal expansion joint. Bid pricing shall be per linear foot of each side and shall include all necessary labor and VDOT approved materials to include removal, disposal, repair, cleaning, applying joint sealer and ready for traffic as roadway restrictions dictate. All areas to be repaired shall be approved by VDOT prior to beginning work. Additional or replacement reinforcing steel and galvanic anodes shall be paid separately. All joint seal installation shall be paid separately.