Specifications include, but are not limited to: 1. Compact footprint not to exceed: exterior dimensions: 33.0” high x 23.6” wide x 23.6” deep 2. Interior Useable Chamber Space: 20.6” high x 21.1” wide X 20.6” deep 3. All electric operation (208V, 3Phase 20A) with power cord terminating in NEMA L1520P plug. 4. Pull Down Door: Features dual axis motion to minimize unnecessary wear on the gasket. Designed to support the weight of loaded baskets without additional supports. 5. Interior: Chamber sump constructed of type 316L high molybdenum content stainless steel for superior corrosion resistance. Chamber walls, ceiling and door are constructed of type 304 stainless steel. Chamber is laser-welded and crevice-free with rear wall docking connections for injector modules. No exposed heating elements present in chamber sump. 6. Exterior cabinet: Constructed of type 304 brushed stainless steel for corrosionresistance 7. Upper and lower spray arms with sensor for automatic spray arm monitoring of rotation and/or blockages of spray arms; the rotation speed of the spray arm is monitored during wash cycles. Blockages due to loading errors or build-up of foam create fault condition and alert user. 8. Filter: 4-fold filter system with large surface filter, coarse filter, glass breakage filter and micro-fine filter 9. Test port: Access port for monitoring of wash temperatures for process validation. 10. Water-Proof System: Incoming hot, cold and DI water lines are double wall with electronically activated solenoids. Includes float sensor in washer drip pan. In event of leak float switch is tripped which shuts of incoming water and activates drain pump.