Specifications include, but are not limited to: General Requirements: The unit shall be equipped with the following features: a. The trailers shall have an inside bed length of 168” and inside bed width of 96. b. The deck height shall be 34”. c. The inside bed height shall be 20” with fold down sides. d. The decking shall be smooth 10’ gauge steel. e. The coupler shall be a pentile hook. f. The main frame shall be 6” x 2” tube. g. The cross members shall be 4” C-channel. h. The tongue shall be 8” x 2” tube. i. The unit shall have an integrated tarp kit, underbody spare tire tub and ramps that store underneath the bed. j. The jack shall be an HD 12K dropleg jack with stabilizer jack receivers. k. The unit shall have a combination barn door spreader gate with cambar. l. The unit shall include slipper springs, sealed brake connections, and tongue-mounted HD control box with key lock. m. The unit shall include five (5) D-ring tie-downs. 2. Power: a. The unit shall include a hydraulic scissor hoist with power up and gravity down. b. The pump shall be 3200 psi 12VDC with hydraulic reservoir. 3. Battery: a. The battery shall be a Group 24 deep cycle marine battery. b. A solar battery charger shall be included to maintain the battery. 4. Capacity: a. The trailer payload capacity shall be 9,860 pounds minimum. b. The GVWR shall be 14,000 pounds. c. The curb weight shall be 4,140 pounds. 5. Axle: a. The axles shall be 7,000 slipper spring cambered brake that are easy to lubricate. 6. Tires: a. Spare tire 235/80R16 LRE radials on white spoke tires. 7. Brakes: a. The unit shall be equipped with self-adjusting electric drum brakes on each axle. b. The unit shall include an electric breakaway kit with charger.