Specifications include, but are not limited to: Installation, maintenance of camera systems of approximately 300 new cameras operated with two separate master control units and 7 sub-control units. Interfacing all low and high voltage cycling locks. • Interfacing with programmable logic controllers (PLC-OMRON), intercoms (Harding), paging system (Rauland Borg) and associated touch screen hardware (Wonderware). • Maintain existing camera/security system throughout the project. This is critical to the security of the facility. Transitioning to the new equipment and system must be planned and scheduled in advance with limited disruption to security and the daily operation of the facility. • WVRJ will provide secure storage space at the facility for deliveries of hardware for the project. System Requirements: • The recording system will have SAN/NAS type device capability for additional storage space if needed. • Video masking that meets PREA requirements for privacy must be provided. • The system shall have the capability to process each camera for motion detection if required, along with the ability to detect motion for triggering an event recording. • The system shall provide the ability to send alarms and system health events via email or text. • The system must support multiple users viewing live camera and/or video recordings concurrently. • The system shall be on its own secure network segregated from the WVRJ network. • Full system redundancy, including power supplies to all servers, network switches, and hot swappable disk drives in server hardware and SAN hardware in a raid configuration that includes a “hot spare” or equivalent. • Viewing stations will be set up with the ability to save encrypted recordings to DVD, flash drive, or external storage device. • Provide only non-proprietary software. For software and software vendors to be considered non-proprietary it must have a minimum of five system integrators
