Specifications include, but are not limited to: Installation of the following equipment at two separate locations (Lake Carmi State Park & 369 Patton Shores Road): • An electrical stack consisting of an enclosure for a circuit breaker box and an outdoor rated enclosure for a Variable Speed Drive Unit to control an air compressor and a service plug. This equipment will be mounted on a frame, typically a 2’x2’ post 4 -5 feet high, next to the compressor. • Electric conduit to be buried from the compressor to a utility power source. This line will be vibratory plow trenched or directionally drilled from the utility pole to the compressor site with minimal disruption to landscape. • A 30 HP Rotary Claw Compressor Unit in a factory designed, sound insulated stainless steel enclosure. The dimensions of the unit are approximately 5.5 high x 7.5 feet long x 4 feet wide. • The compressors will be placed at agreed upon locations on the above-mentioned properties. • A 2” HDPE main air line will be buried from the compressor to the lakefront, in a location to be agreed upon by Owner. This line will be directionally drilled from the compressor to the lakefront with minimal disruption to the landscape.