Specifications include, but are not limited to: Provide dry polymer for Waste Activated Sludge (WAS) Thickening Process. provide dry polymer for Waste Activated Sludge (WAS) Thickening Process. Available Capacity (proved using cross-linked liquid polymer) • Hydraulic capacity Four @ 400 gpm per thickener • Solids capture, min. 98% • TWAS ave. dry solids conc. 6% • TWAS dry solids capacity 11,770 pph per thickener The primary goal of this RFP process is to significantly improve the performance and capacity of the existing polymer feed and RDT thickening system to more closely match the capabilities indicated above. These improvements are expected to reduce operating costs and increase performance of the anaerobic digesters and dewatering facilities which follow and rely on the thickeners. In order to achieve that goal and be considered for selection, the polymer shall demonstrate capability to meet following performance standards that have been established for this effort.