Specifications include, but are not limited to: Refuse body shall be 1 0 cubic yard usable liquid capacity minimum cylindrical design. Body to be constructed of 3/16 Corten or X 10 steel or approved equal. Rear door shall be a full opening, hinged at the top and adjustable. Liquid drain to be 6 inch minimum in diameter for removing excess liquids. Drain to have a knife style valve or approved equal. Drain valve shall have attachment for and have 10 feet of 6-inch lay-flat hose. Rear door to have debris deflector shield for tank. Body shall have externally mounted power door locks, sequential control (grabber style or equal), appropriate to the application. I-Manual T-handle for safety. Body lift mechanism shall be providing the body to raise a minimum 50-degree angle and be appropriate to the application. Body lift shall have a capacity of 56,000 lbs. minimum. Lube manifold shall be located allowing ground level greasing of boom cylinders, float indicator, door hinges, and hoist cylinder. Dump controls halt be located on the curbside mid-ship of the unit, well forward of the dumping area for safety. A manual override system shall be provided in case of system failure.