Specifications include, but are not limited to: General Manage Facility Document program to Inspect and maintain equipment as specified by manufacturer /supplier. Per Man Spec Staff Manage Facility Compile data sheets and maintenance checklists and confirm with manufacturer /supplier. Per Man Spec Staff Full Inspection Facility Ensure that there is appropriate signage and warnings that identifies potential hazards. Annual Staff Full Inspection Facility Ensure facility components (inverters, combiner boxes, disconnect switches, switchgear, etc.) are not accessible to unqualified personnel, and require tools or have locks to prevent unauthorized access to the equipment. Annual Staff Visual Inspection Facility Look for any signs of intrusion by pests such as insects and rodents. Remove any nests from electrical boxes (junction boxes, pull boxes, combiner boxes) or arrays. Use safe sanitation practices because pests may carry disease. Annual Staff Service Facility For any service ensure proper use of lockout/tagout procedures, personal protective equipment (PPE) and appropriate procedures for safely disconnecting live circuits. Continual Staff Service Facility Use torque marks on specified connections to ensure lugs are tightened to proper torque values. If not visible, technician can mark lug after torquing during maintenance visit. Proper torque mark is made with specialized torque marking pen. The mark is a straight line through the lug and the housing. Continual Staff