Specifications include, but are not limited to: The Scope of Work contemplated under this selection process includes at a minimum: design/specifications, engineering estimates, advertising, award recommendation, project management, documentation, construction management, and final report. Current projects identified for funding by the FAA/State of Utah include the following: 1. Pavement Preservation Project (scheduled for federal FY-2020) 2. Rehab Service Road and Parking Lot, Install Fuel Farm, and Airport DBE Plan Update (scheduled for federal FY-2022) 3. Pavement Preservation Project (scheduled for federal FY-2024) Potential project details may include the following: 1. Pavement Preservation Project - FY-2020 a. Design, bid and Construction oversight of the Airport pavement preservation project. i. Design, bid and manage the preservation of Airport pavements under the direction of the UDOA and FAA, in compliance with FAA regulations. b. Perform Preconstruction Engineering and Construction Engineering Management tasks using the appropriate FAA Advisory Circular(s), at a minimum: i. Conduct Environmental Review ii. Evaluate the current Airport Layout Plan iii. Survey and soil investigation iv. Design the Airport preservation v. Hold design review meetings vi. Advertise completed plan set vii. Conduct pre-bid meeting, if necessary viii. Conduct preconstruction meeting ix. Provide project management x. Provide Construction Engineering Management xi. Progress reports xii. Final reports per FAA requirements. 2. Rehab Service Road and Parking Lot, Install Fuel Farm, and update the DBE Plan - FY2022 a. Design, bid and Construction oversight of the Airport pavement preservation project. i. Design, bid and manage the preservation of Airport pavements under the direction of the UDOA and FAA, in compliance with FAA regulations. b. Perform Preconstruction Engineering and Construction Engineering Management tasks using the appropriate FAA Advisory Circular(s), at a minimum: i. Conduct Environmental Review ii. Evaluate the current Airport Layout Plan iii. Survey and soil investigation iv. Design the Airport preservation v. Hold design review meetings vi. Advertise completed plan set vii. Conduct pre-bid meeting, if necessary viii. Conduct preconstruction meeting ix. Provide project management