Specifications include, but are not limited to: Provide material and labor needed to complete glass replacement/installation for all district facilities. BULK GLASS: 1. Provide all materials in a timely manner. A DISD Glass Team Leader and/or Manager shall be notified within 48 hours after receipt of DISD's purchase order to deliver materials. 2. Provide glass which is equal to or better than glass that is being replaced. 3. Must provide laminated safety glass, tinted and un-tinted as required. 4. Must provide Safety Data Sheets (SDS) for all materials used when requested by DISD 5. Must maintain an adequate supply of standard replacement materials required under this agreement which are easily accessible from the greater Dallas-Fort Worth area. GLASS CONTRACTOR: 1. Proposer must provide proof that their firm is currently licensed as a Glass and/or Glazing 2. Contractor with the State of Texas. 3. Provide detailed qualifications of employees designated to perform work under this agreement. 4. List the number of National Glass Association certified installers which will perform service under the terms and conditions of this Request for Proposal. 5. Provide glass which is equal to or better than glass that is being replaced. 6. Must provide laminated safety glass, tinted and un-tinted as required. 7. Must be able to provide Safety Data Sheets (SDS) for all materials to be used for repairs and replacements, to the site contact person. 8. Provide a list of individuals available for call out in the event of emergency. 9. Provide two-hour response time or better for each emergency call out. 10. Provide all materials and labor required to complete the repair/replacement in timely manner. 11. A DISD Glass Team Leader and/or Manager shall be notified within 48 hours after receipt of 12. DISD's purchase order to begin repair/replacement.