Specifications include, but are not limited to: DIMENSIONS: Open size to be 29 1/2" x 139 1/2" with Split Benches LIFT MECHANISM: Tables shall fold and open in one fluid motion, assisted by a combination of pneumatic cylinders and a torsional energy storage system. TOPS AND BENCHES: Table tops and benches shall be solid core nominal 3/4" thick, warp-resistant construction. Center core shall be of Novoply brand 45 PCF density. A .053 high pressure laminate face shall be used for the top surface with a .045 high pressure laminate backer for the bottom surface. Table frame shall be secured to the Novoply table top with deep thread screws, expansions rivets are not to be used. Corners have a 1 1/2" radius. EDGES: "Perfect Edge". The "Perfect Edge" shall be made of 1/4" thick by 3/4" high, cast black polyurethane. It is mechanically and chemically bonded to the table core and chemically bonded to the laminate surface edges to provide a superior, permanently sealed barrier to moisture, dirt, and bacteria penetration. Tops and benches are to be sealed with Perfect Edge. FRAMES: Table frame shall be fabricated using a welded unitized construction, integrating all structural steel members into a self-supporting unit. The table top support apron shall be 11-gauge channel steel, pierced to securely anchor the tops. End leg and center leg assemblies shall be robotically wire-welded. Horizontal and vertical tubing shall be of 1 1/4" OD 14-gauge steel. Hinges and lock plates shall be 7-gauge steel. Stretcher bars shall be 3/4" x 1 1/2" 14-gauge oval steel tubing. All legs shall operate from the unitized frame, not the table top.