Specifications include, but are not limited to: Installation of Residential Electric Distribution Facilities and Electrical Terminations. Rehabilitation of Existing Underground Residential Distribution Residential Facilities. Services may include, but are not limited to the following: i. Installing removing, and relocating pad-mounted transformers removing submersible transformers; ii. leveling transformer pads; iii. installing poured-in-place pads; iv. removing poured-in-place pads; v. pulling or pushing URD cable into conduits; vi. removing URD cables from conduits; vii. installing two-inch (2”), two-and-half-inch (2-1/2”) and/or three-inch (3”) PVC or polyethylene conduit, 3/4-inch streetlight cable-in-conduit, secondary enclosures, ground rods and associated materials, as required; viii. all URD primary and secondary electrical installations and terminations within pad-mounted or submersible transformers, pad-mounted switch gear, junction boxes, manholes, secondary enclosures, and overhead-to-underground risers.