Specifications include, but are not limited to: CHILLER SPECIFICATIONS: - Water cooled, centrifugal chillers, utilizing current us manufactured refrigerant containerized, fully instrumental and automatically controlled, 42 degree supply. The condenser water provided by TAMU will be at a standard range between 85F and 95F. The Contractor is responsible for pumping of the condenser water at rated chiller capacities. Costs and equipment associated with pumping the condenser water shall be included in the monthly rental rate. (With the exception of the cost of the electricity required to power the pump which shall be provided by TAMU.) - Rates must include appropriately sized (500 kva-2000 kva) transformers for electrical service if needed. - All chillers must be equipped with a run-hours meter. The rental chiller run-hours shall be documented on the bill of lading upon installation of the rental chiller. CHILLER RENTAL - Chillers are listed according to the duration of the equipment rental so that TAMU may capture price breaks if offered. - There is no guarantee of equipment rental. - Charges must be pro-rated (based on 30 days) if rental is terminated during the billing cycle.