Specifications include, but are not limited to: Fabricate (1) sign each of the (5) different plaques (24 inches W x 6 7/8 inches H) shown in the attached “…Individual Plaques…” file; a total of (5) plaques will be delivered to MSU. All (5) plaques shall have at least (4) studs imbedded and protruding out of the backside of the plaque; total length of studs shall be ¾ inch (it is mounting to a ¼ inch thick steel plate). Fabricate (1) sign of the plaque (24 inches W x 28 inches H) shown in the attached “…Entire Story…” file; a total of (1) plaque will be delivered to MSU. Need to add the following statement to the bottom of this sign (only); Plaques made possible through the generosity of Warren and Pam Ayres. Plaque shall have the studs imbedded and protruding out of the backside of the plaque, total length of studs shall be sufficient to secure the plaque to a brick wall.