Specifications include, but are not limited to: 2. Preparation of a topographic, existing conditions survey of the project area that includes the following: 6.2.1. Property lines and easements using base information provided by the CLIENT. 6.2.2. Locating property corners to tie the survey to the existing easements and property lines; 6.2.3. Establishing horizontal and vertical control for the project. 6.2.4. Tying coordinates to all existing improvements, using X, Y and Z coordinate points. 6.2.5. Locating all trees six (6”) inch caliper or larger within the project area. 6.2.6. Identifying the location of any existing utilities. Task will include archive research to determine the location of these utilities. ; Geotechnical investigation and recommendations that include the following: 6.3.1. Drilling of five (5) shallow borings. 6.3.2. One (1) visit to the site with the CLIENT to determine and gain approval for boring locations. 6.3.3. Soil sample testing that shall include the following tests: Moisture Content, Atterberg Limits, Swell Tests, Unconfined Compression 6.3.3.1. Preparation of a written geotechnical investigation. 6.3.3.2. Boring Logs with full testing data.