Specifications include, but are not limited to: 1. The solution shall provide Dynamic VOIP service with SIP Trunking. 2. The services shall connect to existing hardware and the contractor shall incur any infrastructure costs needed to enable the solution. 3. The service shall provide a PBX with 2700 DIDs (Direct Inward Dialing) meaning 2700 serviced phone numbers. 4. The service shall provide VOIP services at 100 mbps with the ability to scale to higher speeds without additional infrastructure investment. 5. The solution shall provide telephone number flexibility allowing AE the ability to route an entire block of telephone numbers to one alternate path. 6. The service shall include a diversity of both inbound and outbound dialing. 7. The service shall use diverse transports in order to provide redundancy and diversity of service. 8. The service shall provide automatic failover so that if one site is configured and service fails at that site, service is automatically rerouted through another existing site to provide disaster recovery and continuity to other sites. 9. The service shall provide a block of free long distance calling minutes. 10. The service shall not incur a cost to forwarded calls unless you’re in a local measured service area, or are forwarding calls outside of your free local calling area. 11. The service shall not incur a cost per DID per month. 12. The service shall not incur a cost for number portability. There shall be no charge to port an existing service to a new location. 13. The solution shall have the capability to be moved to a new location within the next 3 years.