Specifications include, but are not limited to: 1. Supplier shall remove, repair/replace and install diesel bus engines on an as needed basis. 2. Remanufactured diesel engines must be from one of the following qualified re-manufacturers: Caterpillar, Franklin Power Products, Jasper, Navistar Corp., Stewart & Stevenson, or Reviva. Documentation or proof of purchase must be provided at time of delivery. Diesel engines rebuilt by companies other than the ones listed above will not be accepted or exchanged. 3. All engines must be remanufactured to the latest specifications following the OEM’s guidelines. In addition, remanufactured engines must meet or exceed the following requirements: A. All engines shall be dynamometer tested under their own power for leaks, cylinder pressure, vacuum and compression. Vendor must provide documentation of testing at time of delivery. B. All fuel injectors must be rebuilt, or replaced with rebuilt tested and set injectors. 4. Items which are NOT to be included on trimmed remanufactured engines are: Starter, alternator, power steering pump, air compressor, fan belts, flywheel or flex plates and air cleaner. 5. Remanufactured diesel engines shall be warranted free of defects for two (2) years or 50,000 miles (whichever occurs first) including all parts and labor. Vendor shall be responsible for paying all applicable towing charges stemming from engine failure during the warranty period.