Specifications include, but are not limited to: STORAGE UNITS 5.1. Open Bay: Refers to a storage unit that is configured as a high-security office. 5.2. Combination: Refersto a storage unit that has, within a single unit, both storage and office space. 5.3. Deluxe: Refers to the manner by which the storage unit door is opened. A Deluxe, or easyopening, door opens at the waist. 5.4. Standard: Refers to a storage unit the door of which opens from the bottom of the unit. 5.5. Tri-Door: Refers to the Tri-Cam Locking System. 5.6. The storage units provided shall include, but not be limited to, at a minimum, eight (8) ft. wide by (x) the following: 5.6.1. 10 ft. Steel-Open Bay 5.6.2. 10 ft. Steel-Deluxe 5.6.3. 12 ft. Steel-Open Bay 5.6.4. 12 ft. Steel-Deluxe 5.6.5. 15 ft. Steel-Standard 5.6.6. 15 ft. Steel-Deluxe 5.6.7. 16 ft. Steel-Open Bay 5.6.8. 16 ft. Steel-Deluxe 5.6.9. 20 ft. Steel-Open Bay 5.6.10. 20 ft. Steel-Open Bay Office 5.6.11. 20 ft. Steel-Deluxe Door on one (1) end 5.6.12. 20 ft. Steel-Combination (10’ Office) 5.6.13. 20 ft. Steel-Standard 5.6.14. 22 ft. Steel-Deluxe Door on Both Ends 5.6.15. 40 ft.-Steel Standard 5.6.16. 40 ft.-Standard Tri-door 5.7. The following are the minimum material specifications for the storage units. All information listed is not limited to these requirements: 5.7.1. Floor Unit-Outer Rails shall be 5’-25’=10 Gauge 4.7.2. 30’-40’=7 Gauge 4.7.3. Floor Units-Joists, 12 Gauge-16 Gauge 4.7.4. Floor Unit-Plywood, ¾” & ½ “ Plywood 4.7.5. End Frames shall be 12 Gauge 4.7.6.Siding shall be 16 Gauge Seam, Welded or have high strength steel rivets that are overlapped in the corners by heavy gauge steel corner braces 4.7.7. Roof shall be 18 Gauge Seam, Welded 4.7.8. Top Rails shall be 10 Gauge 4.7.9. Paint/Color-Beige, White, or Brown 4.7.10. Signs Sale Configuration 4.7.11. Doors shall have Double Swing Outdoors 4.7.12. Bulkhead shall have 16 Gauge Seam, Welded 4.7.13. Bottom Corner Connectors 4.7.14. Forklift Pockets, one Set 4.7.15. Stacking Block, one Set, if required by manufactures specification when stacking 4.7.16. Vents, top and bottom 4.7.17. Undercoating 4.7.18. Shelving Brackets 4.7.19. Shelving materials, upon request